Log System Configurator: Preset Tab - Qlogic 12000 Series User Manual

Figure 1-26 Log System Configurator: Preset Tab
To change the log level settings:
1. Click the On-Off check box to the right of the setting(s).
2. Click the Apply button to save any changes.
Syslog Host Tab
configure logging messages to be sent to a syslog host through an IP address or
domain name server (DNS) host name.
NOTE:
If the Host IP address is 0.0.0.0, no syslog host is configured, otherwise log
messages are sent to the syslog server at a specified IP address and port.
D000101-000 E
The Syslog Host tab (Figure
1–Operations and Administration
Configuration and Monitoring Features
1-27) allows the user to
1-19