Set Level
To efficiently set up Log filtering, enable only those levels that need to appear in
the log. The levels are handled by two layers.
The first layer is the Preset Layer. This layer allows the user to select the levels of
messages the switch will generate. If the level is selected here, it could be logged
into Ram Device or the Syslog Device. Any unselected levels will not be logged to
any Device.
The second layer is the Device Levels. This allows the user to select the levels of
log messages to be saved.
NOTE:
To save log message levels, select the log level in the Device tab and Preset
tab.
The Set Level button allows the user to set log level configuration parameters for
all software modules.
To set log levels:
1.
From the menu, select Logging.
The Set Level button is displayed
2.
Click Set Level.
3.
The Log System Configurator (Device Tab) window is displayed
(Figure
D000101-000 E
Figure 1-22 Logging Submenu
Figure 1-23 Set Level Button
1-24)
1–Operations and Administration
Configuration and Monitoring Features
(Figure
1-23).
1-15