Set Field Thresholds - Qlogic 12000 User Manual

A

Set Field Thresholds

The Set Field Thresholds screen allows the user to set, for a specific parameter(s),
an error message threshold for the cable ports on the switch.
To change error reporting thresholds, do the following:
1. Click on Port Stats.
2. Click on Set Field Thresholds. The Set Field Thresholds screen is displayed:
3. To change a threshold value for any field:
a. Click in the Threshold field.
b. Enter a new threshold value.
NOTE:
c. Click Apply.
NOTE:
D000101-000
Figure 1-68 Set Field Thresholds
Figure 1-69 Set Field Thresholds Screen
For those fields with a "Percent of Max" time unit, the user may
enter a number from 0 to 100. For those fields with a "1 Second"
time unit, the user may enter a number from 1 to 65,535.
If any threshold is exceeded on any port, the port will be displayed
as red on the switch map and a warning message will be logged.
Operations and Administration
Configuration and Monitoring Features
1-45