Subnet Manager Configuration File - Qlogic 12000 Series User Manual

An event has occurred that has caused the slot mode to be set to disabled.
The user should resolve the error and reset the mode to the proper value for
the affected slot.
NOTE:

Subnet Manager Configuration File

The Subnet Manager Configuration File window allows the user to upload and
download new QLogic Fabric Manager embedded subnet manager files, as well
as start and restart all applicable master and standby subnet managers using the
new file.
1. From the Chassis menu, select Config File Admin.
The Subnet Manager Config File button is displayed
Figure 1-56 Subnet Manager Configuration File
2. Click Subnet Manager Config File.
The Subnet Manager Configuration window is displayed
D000101-000 E
The default settings for this window are as shown above. The user
should not change the defaults unless instructed by Technical Support.
1–Operations and Administration
Configuration and Monitoring Features
(Figure 1-56).
(Figure 1-57).
1-39