Target Mib Configuration Button; Snmp Target Configuration Window - Qlogic 12000 Series User Manual

1. From the menu, select SNMP.
The Target Configuration button is displayed
Figure 1-41 Target MIB Configuration Button
2. Select Target Configuration.
The SNMP Target Configuration window is displayed
Figure 1-42 SNMP Target Configuration Window
The top section of the window, SNMP Target Addresses, allows the user to
determine what type of SNMP traps are sent, and where they are sent. The rows
provide an area for specifying multiple trap destinations. The middle section
SNMP Address Form, allows the user to record new SNMP address information
for the applicable module. The bottom section of the window, SNMP Target
Parameters, allows the user to configure each trap destination with version,
optional security information, and filtering mechanisms.
D000101-000 E
1–Operations and Administration
Configuration and Monitoring Features
(Figure 1-41).
(Figure 1-42):
1-27