Configuring The Switch Default Gateway Ip Address; Set Oob Lan Ipv6 Window; Set Switch Default Gateway Ip Address Button - Qlogic 12000 Series User Manual

1–Operations and Administration
Configuration and Monitoring Features
1. To automatically configure and assign addresses from an IPv6 router, click
the Auto Config Enabled radio button.
NOTE:
2. Click Apply.

Configuring the Switch Default Gateway IP Address

The Set Default Gateway IP window allows the user to configure the IP address
for the default gateway to route packets from the OOB management port to an
external network.
To configure the Switch default gateway IP address:
1. From the menu, select OOB LAN IP.
The Set Default Gateway IP button is displayed
Figure 1-79 Set Switch Default Gateway IP Address Button
2. Click Set Default Gateway IP.
The Set Default Gateway IP window is displayed
1-60
Figure 1-78 Set OOB LAN IPv6 Window
The IPv6 router must be configured to assign addresses using
stateless address auto configuration.
(Figure 1-79).
(Figure 1-80).
D000101-000 E