Filter Status; Filter Status Button - Qlogic 12000 Series User Manual

This field determines whether or not the entry is saved for each reboot of the
switch.
Status
Indicates the current status of the row. The row may be in one of three
states:
NOTE:

Filter Status

The SNMP Filter Status window allows the user to view parameters for rfc2273
(SNMP-NOTIFICATION-MIB).
To view SNMP filter status:
1. From the menu, select SNMP
The Filter Status button is displayed
2. Click Filter Status.
The SNMP Filter Status window is displayed
D000101-000 E
Nonvolatile means that the value is saved, and remains with each
subsequent reboot.
Volatile or Other indicates it will not be saved.
Active
Not in service
Not Ready
A status of not in service indicates that the current row will not be
used in the event a trap is generated by the system. Toggling a trap to
not in service, which temporarily suspends trap forwarding, may be
useful to keep values intact.
Figure 1-43 Filter Status Button
1–Operations and Administration
Configuration and Monitoring Features
(Figure 1-43).
(Figure 1-44).
1-31