Set Community Strings; Snmp Filter Status Window; Set Community Strings Button - Qlogic 12000 Series User Manual

1–Operations and Administration
Configuration and Monitoring Features

Set Community Strings

The Set Community Strings window allows the user to set two SNMP
community names:
Read Only Community Name
Read/Write Community Name
To set the Community Strings:
1. From the menu, select SNMP
The Set Community Strings button is displayed
2. Click Set Community Strings.
The Set Community Strings window is displayed
1-32
Figure 1-44 SNMP Filter Status Window
Figure 1-45 Set Community Strings Button
(Figure 1-45).
(Figure 1-46).
D000101-000 E