Qlogic 12000 Series User Manual page 63

NOTE:
c.
NOTE:
The following are descriptions for each field in the Set Field Thresholds area:
NOTE:
The thresholds for the following four fields are set as a percentage of
maximum; that is the percentage of maximum port capacity, which
depending upon IB fabric configuration can be:
portXmitDataThresh
The threshold for the number of 32-bit data words transmitted by the port.
portRecvDataThresh
The threshold for the number of 32-bit data words received by the port.
portXmitPktsThresh
The threshold for the number of data packets transmitted by the port.
portRecvPktsThresh
The threshold for the number of data packets received by the port.
NOTE:
portSymbolErrThresh
D000101-000 E
For those fields with a "Percent of Max" time unit, the user may enter
a number from 0 to 100. For those fields with a "1 Second" time unit,
the user may enter a number from 1 to 65,535.
Click Apply.
If any threshold is exceeded on any port, the port will be displayed as
red on the switch map and a warning message will be logged.
4X (10/20Gbps)
1X (2.5Gbps)
The thresholds for the following fields are set based upon the number
of error message which can occur in one second. The value can be
from 1 to 65,535.
1–Operations and Administration
Configuration and Monitoring Features
1-51