1–Operations and Administration
Configuration and Monitoring Features
2.
Set the current date and time using the drop-downs for Month, Day, and
Year as well as Hour, Minute, Seconds, and AM/PM.
3.
To save, click on Apply.
To set time zone and daylight saving time (DST) settings:
1.
In the Time Zone drop-down, select the correct time zone based upon
Greenwich Mean Time (GMT)
Figure 1-75 Time Service - Time Zone/Daylight Saving Time Setup
2.
Using the Which, Day, and in Month drop-downs, set the start and end
dates for daylight saving time.
3.
To save, click on Apply.
Time Zone Tips:
In the U.S. the following time zones are in effect:
Eastern Standard Time = GMT –5
Central Standard Time = GMT –6
Mountain Standard Time = GMT –7
Pacific Standard Time = GMT -8
Daylight Saving Time Tips:
For most of the United States, Daylight Saving Time (DST) begins at 2 a.m. on the
second Sunday of March, and ends at 2 a.m. on the first Sunday in November.
Additionally, for those regions in the United States that do not observe DST, the
start and end dates in the Which, Day, and in Month settings should be set to the
exact same date.
OOB LAN IP Submenu
Configuring the Switch OOB IP Address
To configure the Switch IP address:
1-58
(Figure
1-75).
D000101-000 E