Module Information Area; Chassis View Component Information Area - Qlogic 12000 Series User Manual

1–Operations and Administration
Chassis Viewer
Logout
NOTE:
The Logout button is only displayed if the user has set the User
Authentication parameter to Login Enabled through the HTTP Session
Configuration submenu. Refer to
page 1-24
Reboot
View Field Replaceable Unit (FRU) Information.
View Log

Module Information Area

The Module Information Area
information for each specific leaf, spine or management module. The information
area is comprised of fields that are tied to live data from the selected hardware
component as well as live system information.
The information area has the following button:
Refresh:
Refreshes all fields in the information areas.

Chassis View Component Information Area

The Chassis View Component Information Area
to monitor important information for each specific hardware component, as well as
important system information. The information area is comprised of two different
fields:
The white fields allow the user to add or modify applicable general and
system information which is specific to their environment.
The gray fields are tied to live data from the selected hardware component
as well as live system information.
1-8
for more information.
(Figure
Figure 1-16 Module Information Area
"HTTP/CLI Session Configuration" on
1-16) allows the user to view high-level
(Figure 1-17) allows the user
D000101-000 E