Operations And Administration; Chassis Viewer; User Authentication - Qlogic 12000 Series User Manual

1
Operations and
Administration

Chassis Viewer

Chassis Viewer is QLogic's browser-based device management software.
Chassis Viewer provides the primary management interface for the QLogic 12000
switches, allowing the user to perform management, configuration, and monitoring
tasks related to InfiniBand networks.
Chassis Viewer runs on the firmware of the 12300 and each management module
of the 12800 series. The browser must be on a workstation which has IP
connectivity to the LAN port (RJ-45 connector) on the switch.
To access Chassis Viewer, point a browser to the IP address of the switch.
For a list of supported browsers, please refer to the QLogic 12000 Release
Notes.
If user authentication is enabled, the User Authentication window shown in
Figure 1-1
D000101-000 E
is displayed:
Figure 1-1 User Authentication
1-1