Time Marker Function Specifications; Wave Generator Specifications - Fluke 5520A Service Manual

6-89. Time Marker Function Specifications

Time Marker into 50
1-Year Absolute
Uncertainty, tcal 5 C
Wave Shape
Typical Output level
Sequence
Adjustment Range
Resolution
[1] t is the time in seconds.
[2] The 2 ns time marker is typically > 0.5 V p-p.

6-90. Wave Generator Specifications

Wave Generator Characteristics
Amplitude
Range
1-Year Absolute Uncertainty, tcal
5 C,
10 Hz to 10 kHz
Sequence
Typical DC Offset Range
Frequency
Range
Resolution
1-Year Absolute Uncertainty, tcal
5 C
[1] The dc offset plus the wave signal must not exceed 30 V rms.
5s to 100 s 50 s to 2 s
(25 + t*1000) (25 + t*15,000)
ppm [1] ppm [1]
pulsed sawtooth pulsed sawtooth
> 1 V pk > 1 V pk
5-2-1 from 5 s to 2 ns (e.g., 500 ms, 200 ms, 100 ms)
At least 10% around each sequence value indicated above.
4 digits
Square Wave, Sine Wave, and Triangle Wave
1 s to 20 ns
25 ppm
pulsed sawtooth
> 1 V pk
into 50 or 1 M
into 1 M : 1.8 mV to 55 V p-p
into 50 : 1.8 mV to 2.2 V p-p
(3% of p-p output + 100 µV)
1-2-5 (e.g., 10 mV, 20 mV, 50 mV)
0 to ( 40% of p-p amplitude) [1]
10 Hz to 100 kHz
4 or 5 digits depending upon frequency
(25 ppm + 15 mHz)
SC300 Option
SC300 Specifications
10 ns to 2 ns
25 ppm
sine
> 2V p-p [2]
6
6-69