Fluke 5080A Manual
Hide thumbs
Also See for 5080A:
- Operator's manual (166 pages) ,
- Service manual (116 pages) ,
- Getting started manual (38 pages)
Related Manuals for Fluke 5080A
Summary of Contents for Fluke 5080A
- Page 1 Fluke Calibration products and services Short form catalog Precision, performance, confidence. ™...
-
Page 2: Table Of Contents
Table of contents Electrical Temperature calibration calibration DC/LF electrical calibrators ..........5 Standard platinum resistance thermometers ..18 Specialty calibrators ............6 ITS-90 fixed-point cells ..........18 Oscilloscope calibrators ..........7 Cell maintenance apparatus ........19 Precision multimeters ...........7 Thermometer readouts ..........20 Electrical standards ............8 Reference PRTs .............21 Featured products... - Page 3 Pressure Controllers/Calibrators Page 29 Featured products 6270A Modular Pressure Controller/Calibrator 2638A Hydra Series III Data Acquisition System Page 29 Page 47 2271A Industrial Pressure Calibrator Fluke DAQ 6.0 Application Software Page 29 Page 47 Service programs.........50 Training ............51 www.flukecal.com...
-
Page 4: Electrical Calibration
Electrical calibration Electrical calibration refers to the process of properties for other devices called units under verifying the performance of, or adjusting, any test (UUTs). Because these precise devices have instrument that measures, sources, or tests thoroughly known performance characteristics electrical parameters. - Page 5 Product highlights 5730A Multifunction Calibrator 5322A Electrical Safety Tester Calibrator The new gold standard in electrical Calibrate your entire electrical safety calibration tester workload even more easily and efficiently! The 5730A High Performance Multifunction Calibrator is the culmination of years of engineer- The 5322A Electrical Safety Tester Calibrator ing development, customer research and industrial helps calibration technicians comply with new...
- Page 6 Electrical Multi-Product Multifunction Oscilloscope Power and Energy Precision Process Tester Calibrators Calibrators Calibrators Calibrators and Standards Calibrators Calibrator Workload 5080A 5502A 5522A 5730A 9500B 5322A 6003A 6100B 6105A 525B 7526A Analog/panel meters High burden meters Low burden meters V dc & V ac V dc, I dc &...
-
Page 7: Dc/Lf Electrical Calibrators
• Support instruments of up 5502A 5080A to 8.5 digits in measurement performance 5522A Multi-Product 5080A High Compliance • Artifact Calibration permits Calibrator Multi-Product Calibrator the lowest cost of support Robust, transportable wide Solutions for your analog and and highest confidence in workload coverage. -
Page 8: Specialty Calibrators
5725A Amplifier • Calibrate insulation resistance measurement instrumentation. testers; leakage current testers; The Fluke 5725A Amplifier is a • Sources and measures dc multifunction installation tes- companion to the 57XX Series voltage, current, resistance ters; portable appliance testers calibrators. -
Page 9: Oscilloscope Calibrators
525B Temperature/Pressure Calibrator Superior accuracy and function- ality in an economical benchtop package. • A calibrator to address process industry instrumentation 525B • Simulates and measures all ANSI thermocouples, as well as L and U types, and provides cold junction compensation to enable calibration of a wide variety of thermocouple instrumentation... -
Page 10: Electrical Standards
732C/734C 5790B 742A Electrical standards 732C/734C DC Reference Standards A40B 752A The simple way to maintain and disseminate 10 V, 1.0 V and 0.1 V • A primary standard for traceability of dc voltage to better than 1 ppm • Eliminates the need for external dividers •... - Page 11 RF calibration RF and microwave calibration refers to the process Precision devices that are commonly used in RF of verifying the performance of, or adjusting/ and microwave calibration fall broadly into four deriving corrections for, any instrument or categories: component that will be used in the measurement Sourcing instruments.
-
Page 12: Rf References
96270A 96040A RF references 96270A 27 GHz Low Phase 96040A Low Phase Noise Noise Reference Source Reference Source The simplest, most accurate and Simplify your RF calibration cost effective single instrument system by replacing many of the for calibrating spectrum analyz- instruments and accessories that ers, RF power sensors and more. -
Page 13: Temperature Calibration
International Temperature Scale of 1990 (ITS-90). In addition, Fluke Calibration provides laboratory Thermometers are typically calibrated by placing and field solutions for calibrating the electronics them in a stable temperature environment (heat used in temperature measurement circuits. - Page 14 Therefore, more calibration throughput means less factory using the DAQ-STAQ Multiplexer or plant downtime. internal High-Capacity Module The Fluke Calibration 6109A and 7109A Portable • Measure thermocouples, PRTs, thermistors, dc V, Calibration Baths are liquid baths that let process dc I, and resistance industry professionals calibrate four times more •...
- Page 15 Selection guides Primary standards Standard platinum resistance thermometers (SPRTs) Model RTPW Description 5681 25.5 Ω –200 °C to 670 °C, quartz sheath 5683 25.5 Ω –200 °C to 480 °C, quartz sheath 5684 0.25 Ω 0 °C to 1070 °C, quartz sheath 5685 2.5 Ω...
- Page 16 Thermometer readouts Intrinsically safe thermometers 1551A Ex 100 Ω thin-film RTD –50 °C to 160 °C Accuracy of ± 0.05 °C (± 0.09 °F) over full range. (–58 °F to 320 °F) Intrinsically safe (ATEX and IECEx compliant). Two models to choose from (-50 °C to 160 °C or -80 °C to 300 °C) 1552A Ex 100 Ω...
- Page 17 Thermometer probes Platinum resistance thermometers (PRTs) Model Range Size Basic Accuracy† Secondary standard PRT 5608-9-X –200 °C to 500 °C 229 mm x 3.18 mm (9 in x 0.125 in) 5608-12-X –200 °C to 500 °C 305 mm x 3.18 mm (12 in x 0.125 in) 5609-12-X –200 °C to 670 °C 305 mm x 6.35 mm (12 in x 0.25 in)
- Page 18 Rosemount 915 controller with Rosemount-designed baths. controllers Fluke Model 2100 and 2200 controllers can be integrated with homemade baths or other heat sources Calibration to achieve performance levels approaching Fluke Calibration baths. bath controllers *Not for sale in Europe Temperature calibration...
- Page 19 Industrial temperature calibrators Field metrology wells Model Range Accuracy 9190A -95 °C to 140 °C (-139 °F to 284 °F) ± 0.2 °C 9142 –25 °C to 150 °C (-13 °F to 302 °F) ± 0.2 °C 9143 33 °C to 350 °C (91 °F to 662 °F) ±...
-
Page 20: Standard Platinum Resistance Thermometers
• Drift rate typically 0.003 °C weeks and TPW for months) • Calibration options by fixed • Manufactured and tested by point Fluke Calibration’s primary standards scientists 5686-B Glass Capsule SPRT Mini Fixed-Point Cells Designed for metrology work requiring small SPRTs. -
Page 21: Cell Maintenance Apparatus
9114, 9115A, 9116A 9117 7196B Cell maintenance apparatus 9114, 9115A, 9116A 7012/7312 Triple Point of Freeze-Point Furnaces Water Maintenance Baths Designed for maximum-length Keep your cells up and running plateaus. reliably for weeks at a time. • Designed to extend plateaus •... -
Page 22: Thermometer Readouts
• Real-time color trending—chart up to Best performance thermometers in their four channels simultaneously price range. • Control Fluke Calibration temperature • Single-channel reference thermometers sources such as dry-wells or Micro- • Two models to choose from—reading Baths for automated calibration routines... -
Page 23: Reference Prts
5640 5608/5609 Fast response PRTs 5622 Fast Response PRTs Designed for temperature measurements requiring fast 5615 5626/5628 response or short immersion over a wide range. 5624 Secondary High temperature • Time constants as fast as standard PRTs 0.4 seconds • Available as DIN/IEC Class A 5608/5609 Secondary PRTs 5624 Platinum PRTs or with NVLAP-accredited... -
Page 24: Compact Calibration Baths
Calibration Baths Temperature Calibration Oil Baths Fast, 0.01 °C stability baths backed by Stable, uniform heat sources for calibra- Fluke metrology, with a deep tank for tions up to 300 °C. calibrating PRTs and liquid-in-glass • Stability as good as 0.001°C thermometers. -
Page 25: Special Application Baths
Rosemount-Designed Baths –95 °C to 140 °C • Depth up to 60 cm (24 in) • Best-in-class stability: All the features of the Fluke ± 0.015 °C full range Calibration 2100 Controller. 7009/7108/7015 • Accuracy using built-in refer- Resistor Baths •... -
Page 26: Dual-Block Dry-Well
9103 9011 6102/7102/7103 Dual-block Micro-Baths dry-well 6102/7102/7103 Micro-Bath Thermometer 9011 High-Accuracy Calibrators Dual-Well Calibrator Portable and extremely stable. Widest temperature range avail- • Small portable calibration able in a single dry-well. baths • Combined range from –30 °C to • Calibrates sensors of different 670 °C, one unit—two blocks size or shape 9140... -
Page 27: Infrared Calibrators
• Accredited calibration included • Calibrates surface sensors up • Accurate, reliable performance to 400 °C from –15 °C to 500 °C • Uses Fluke Calibration 2200 Controller for excellent 9132 and 9133 Portable accuracy and stability Infrared Calibrators • NIST-traceable calibration... -
Page 28: Humidity Calibration
Humidity calibration Humidity affects many properties of air and the into two parts. One part is partially or completely materials that are exposed to it. Monitoring and saturated with water vapor; the other part is mixed measuring humidity is important wherever there is in until the targeted humidity output is reached. -
Page 29: Humidity Calibrators
Product highlights 5128A RHapid-Cal Humidity Generator Fast, portable humidity probe and logger calibration with accredited 1 % RH system accuracy • Best-in-class system accuracy for dependable humidity probe calibration • Rapid humidity and temperature stabilization time for high calibration throughput •... -
Page 30: Pressure Calibration
Fluke Calibration instruments that are The comparison process can be performed in specialized for each type of test fluid. - Page 31 (100 psi). change or add measurement tion system keeps valves clean ranges and free from debris Fluke Calibration’s unique • Integrated electrical mea- control technology enables you surement module provides a to use these calibrators at low or complete solution for calibrat-...
- Page 32 Selection guide Gas Pressure Calibrators This selection guide presents only some of the Fluke Calibration gas pressure calibration line. Other higher accuracy solutions are available for all pressure ranges. Manual Deadweight testers Workload Gauges/sensors Gage Bidirectional* Pressure range Vacuum 90 % vacuum Positive gage pressure 5 inH₂O (1.5 kPa)
- Page 33 Selection guide Hydraulic Pressure Calibrators This selection guide presents only some of the Fluke Calibration hydraulic pressure calibration line. Other higher accuracy solutions are available for all pressure ranges. Manual Semi Automated Deadweight Testers EDWT Electronic Deadweight Tester 6531 6532...
-
Page 34: Gas Pressure Controllers/Calibrators
Gas pressure 7252/7252i Dual Output Gas Pressure Controllers controllers/calibrators A unique and flexible approach to performing automated calibrations over 6270A Modular Pressure a wide pressure range. 6270A Controller/Calibrator • Two independent pressure measure- Calibrate a wide range of pressure gauges ment and control modules and sensors with a single instrument •... -
Page 35: High Pressure Controllers/Calibrators
High pressure Reference 7615 Hydraulic Pressure Controller/Calibrator controllers/ pressure Unique, high speed approach to calibrators indicators high pressure calibration and testing. 8270A/8370A Modular RPM4 • Ranges to 280 MPa (40 k psi) Pressure Controllers/ Reference Pressure Monitor • Measurement precision to Calibrators Premium measurement perfor- 0.01 % of range... -
Page 36: 2400 Series Piston Gauges
PG7601 PG7202 PG7000-AMH PG7102 PG7302 2465A Piston gauges PG7202 High Pressure PG7000-AMH PG7601 Absolute Gas Piston Gauge Gas Piston Gauge Automated Mass Handler Gas piston gauge with vacuum Gas piston gauge with oil-lubri- Automated Mass Handler for cated piston-cylinder for opera- PG7000 Piston Gauges. -
Page 37: Specialty Piston Gauges
PG9607/ PG9602 GPC1 3990 National MPG2 Metrology Institute piston gauges PG9607 Gas Piston Gauge Fully automated primary pressure reference for absolute and gauge pressures to 500 kPa. • Gauge and absolute pressures from 11 kPa to 500 kPa with a OPG1 700HPPK single piston-cylinder... -
Page 38: Industrial Deadweight Testers
Industrial Pressure P3000 deadweight testers comparators P3000 Pneumatic P5510 Pneumatic Deadweight Tester Pressure Comparator* High performance gas deadweight testers, Precise, cost effective solution for with unique suspended piston design for checking pressure measuring instruments P3100 vacuum calibration. to 300 psi (20 bar). •... -
Page 39: Pressure Calibrators
• Measure 0 to 30 V dc • USB communications cable • Powered by internal, recharge- and universal power supply able, high capacity NiMH included standard battery or universal ac mains 2700G adapter • Compatible with Fluke 700P Pressure Modules Pressure calibration www.flukecal.com... -
Page 40: Air Data Calibration
• Fixed wing and rotary wing 2468A range versions Engineered custom systems inte- • True Pt, Ps, Qc operation grate standard Fluke Calibration products into a complete system 2468A Pitot/Static based on the user’s specific Primary Standard requirements. These are often... -
Page 41: Gas Flow Calibration
Fluke Calibration’s molbloc/molbox gas flow in a flow system due to changes in density caused calibration system consists of molbloc flow elements by changing temperature and pressure. Fluke that connect to a flow terminal (either molbox1+ or Calibration molblocs are mass flow standards, which molbox RFM) so the terminal can use pressure and allow reliable comparisons to other flow devices. -
Page 42: Gas Flow Standards
molstic-L MFC-CB™ molbox1+ molstic-S MFC Switchbox molboc-L molbloc-S Sonic Nozzle molstic-S used for molbloc-S Flow Element mass flow elements. Sonic nozzle based molblocs for • Available in 1/2 inch or gas flow up to 5,000 slm. 1/4 inch system plumbing sizes •... -
Page 43: Calibration Software
If you’ve heard about the benefits of automated software is capable of calibrating multiple units calibration and asset management but are puzzled under test simultaneously, automation increases about how everything fits together, call on Fluke throughput as well. Calibration for solutions. Documentation and reports—Calibration... - Page 44 • Import asset and calibration data into • Designed for metrology by metrologists MET/CAL software • Backed by Fluke Calibration, expert in • Help meet the requirements of quality standards calibration instrumentation and software like ISO 9000, ISO/IEC 17025, NRC 10 CFR, ANSI •...
-
Page 45: Electrical And Rf Calibration Software
– MET/CAL procedure writing dures for MET/CAL Calibration – Advanced procedure writing Software – MET/TEAM Asset Management • Warranted by Fluke Calibration – Crystal Reports Writing to produce valid calibrations • Custom MET/CAL procedures on the intended unit under test •... -
Page 46: Temperature Calibration Software
For FDA 21 CFR Part 11 and AMS 2750 Compliant Data Collection Remotely monitor and log a virtu- ally unlimited number of concur- • Support for Fluke 2638A and rent log sessions into a central 1586A, for enhanced data data repository. -
Page 47: Pressure/Flow Calibration Software
Macro-enabled mass flow cali- pressure calibration. bration software package. • Integrated piston gauge support • Fully customizable • Runs complete automated • Supports non Fluke Calibration calibration sequences flow references • Supports multiple units • Performs complex real time under test flow computations, and allows •... -
Page 48: Data Acquisition
Get the data you want, where, how and when you Fluke Calibration designs and manufactures bench want it. Fluke gives you a broad choice in data instruments in a wide variety of product categories. acquisition for process monitoring and laboratory Besides their use on the bench, these instruments test systems. -
Page 49: 2638A Hydra Series Iii Data Acquisition System
Fluke data acquisition products The Fluke Hydra Series III continues the Hydra Fluke DAQ is praised by users for its versatile Series legacy in data acquisition. This new Hydra handling of data acquisition and logging. Improved... - Page 50 0.5 °C +2,000 channels • Easy multi-unit configuration for • Up to 67 universal differential, • Stand-alone data logger any mix of Fluke 2638A, 1586A, isolated inputs operation with the 2686A NetDAQ or 2680 Series • On screen color trend graphing •...
- Page 51 8845A/8846A 8808A General purpose test equipment 8845A/8846A 290 Series Precision Multimeters Waveform Generators Precision and versatility for One, two, or four-channel bench or systems applications. 100 MS/s waveform generators. • 6.5 digit resolution • 100 MS/s 12-bit arbitrary • Basic V dc accuracy of up to waveform capability 0.0024 % •...
-
Page 52: Service Programs
What’s worse, you may Control your cost of ownership not know exactly when to expect it back in your lab. With the Fluke with a Fluke Calibration Silver Calibration Priority Gold CarePlan, you can schedule your calibrations CarePlan. -
Page 53: Training
Held in various locations on dc/low frequency metrology, around the world, training from Calibration: Philosophy in Prac- Fluke Calibration is a great way to tice, Second Edition. It covers real maximize your investment in your world concepts and applications, calibration product. - Page 54 Notes Notes www.flukecal.com...
- Page 55 Notes www.flukecal.com...
- Page 56 In Europe/M-East/Africa +31 (0) 40 2675 200 or PO Box 1186, 5602 BD Fax +31 (0) 40 2675 222 Eindhoven, The Netherlands In Canada (800)-36-FLUKE or Web access: http://www.flukecal.eu Fax (905) 890-6866 From other countries +1 (425) 446-6110 or Fax +1 (425) 446-5716 Web access: http://www.flukecal.com...