Starting The Epicenter Client For The First Time - Extreme Networks EPICenter Software Installation Manual

Starting the EPICenter Client for the First Time

The two default users, admin and user, do not initially have passwords.
It is strongly recommended that you log in the first time with the user name admin, and immediately
change the admin password. You can then add other users with Manager, Monitor, or Administrator
access.
To run the EPICenter client interface for the first time:
1 Launch the EPICenter client.
The EPICenter Login page appears.
2 Select or enter the host name or IP address and port of the EPICenter server.
3 Type the user name
4 Leave the Password field empty.
5 Click Login. The Network Summary Report page appears.
6 Click Admin in the Navigation Toolbar to access the Administration functions of the EPICenter
server.
The User Administration page appears, as shown in Figure 178. The only users are "admin" and
"user."
Figure 178: User Administration window
EPICenter Software Installation and User Guide
in the User field.
admin
Starting the EPICenter Client for the First Time
357