Extreme Networks EPICenter Software Installation Manual page 396

Hide thumbs Also See for EPICenter:
Table of Contents

Advertisement

Voice over IP Manager
NOTE
If you have not yet selected any VLANs for Voice over IP, the Voice VLANs page will be empty. See
"Selecting VLANs for VoIP" on page 397 for instructions on selecting VLANs for VoIP traffic.
Figure 193: Voice over IP main page showing VoIP VLANs
The Voice over IP window initially displays the Voice VLANs page. Only VLANs selected for Voice
over IP are shown in this table. A message at the bottom of the window indicates how many VLANs
have been configured for Voice over IP.
If you have selected VLANs to carry VoIP traffic, this page shows a summary of the configuration,
switch by switch, of every VLAN that has been selected.
For each switch and VLAN, this table shows the following information:
• VLAN: The name of the VLAN. This may appear in the list multiple times if the VLAN is
configured on more than one switch.
• IP Address: The IP address assigned to the VLAN on the switch. This may be blank if the VLAN
does not have an IP address assigned (as is the case with the Default VLAN).
• Switch: The name of the switch.
• QoS Profile: The QoS profile assigned to this VLAN on this switch.
• Priority: The priority associated with the QoS profile.
• Min Bw: The minimum bandwidth for this QoS profile.
• Max Bw: The maximum bandwidth for this QoS profile.
396
EPICenter Software Installation and User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Epicenter 4.1

Table of Contents