Setting Graph Preferences - Extreme Networks EPICenter Software Installation Manual

Real-Time Statistics
Select this to display the data as a bar chart. A 3D bar chart is the default for all chart
displays. The 3D setting is also a user-configurable option.
Select this to display the data as a horizontal bar chart. This chart type by default displays in
3D. The 3D setting is also a user-configurable option.
Select this to display the data as a stacked bar chart. This chart type is only available when
you are displaying individual errors for a single port.
Select this to display the data as an area chart. This chart type by default displays in 3D. The
3D setting is also a user-configurable option.
Select this to display the data as a table.
Select this to zoom in on (magnify) the size of the display. You can select this repeatedly to
zoom up to three times the screen size.
Select this to zoom out (shrink) the size of the display. You can select this repeatedly until
the chart is the desired size.
Select this to display grid lines on the background of the chart.
Determines whether the graph data is updated automatically at every sampling interval.
Click on the icon to toggle between continuous updates, and suspended updates.
Select this to take a "snapshot" of the graph or table view of the current real-time statistics
data.
Select this to bring up the graph preferences pop-up window. You can change a variety of
settings, such as graph and data colors, the sampling interval, or the number of ports in a
top N display.

Setting Graph Preferences

To change the graph settings used in this applet, click the Set Graph Preferences icon in the toolbar.
The Graph Preferences window is displayed, as shown in Figure 128.
274 EPICenter Software Installation and User Guide