View Policy Rules; View Configured Rules - Extreme Networks EPICenter Software Installation Manual

The ACL Viewer
• White indicates that the rule is valid, and has been configured on the device. Both the Ideal and
Configured sides of the table are filled in.
• Yellow indicates that the EPICenter-generated "ideal" rule conflicts with a rule already configured
on the device. Two rules conflict when the traffic patterns for the rule are the same but the specified
treatment (the QoS profile) is different. Both the Ideal and Configured sides of the table are filled in.
• Blue indicates that the rule is configured on the device, but it was not generated by the EPICenter
Policy Manager. Only the Configured side of the table is filled in for these rules.
The columns in the display show information as follows:
• ! (exclamation point) is an empty column used to invoke a sort by policy precedence. Clicking the
column header will sort the policies in policy precedence order.
• Policy displays the name of the policy.
• Ideal Source Port displays the name of the device and the port specified by this policy.
• Ideal Profile indicates the QoS profile specified for port by this policy.
• Config Source Port is the device and port to which the QoS rule applies.
• Config Rule Profile is the QoS profile that applies to this port.

View Policy Rules

The Policy Rules display shows details of the Ideal Source Port QoS rules, as generated by the
EPICenter Policy Manager. The information in this display is as follows:
• ! (exclamation point) is an empty column used to invoke a sort by policy precedence. Clicking the
column header will sort the policies in policy precedence order.
• Policy displays the name of the policy.
• Source Port is the device and port specified by this policy.
• Profile is the QoS profile that is specified for this VLAN by this policy.
• To be used indicates whether the rule is acceptable for configuration on the device (not in conflict
with any other rules). Values for this column are:
— Yes, the rule can be used.
— No (duplicated) indicating that the rule duplicates another rule.
— No (disabled) indicating that the policy is disabled.

View Configured Rules

The Configured Rules display shows details of the Source Port QoS rules that are actually configured on
the device, either through the EPICenter Policy Manager or the ExtremeWare CLI. The information in
this display is as follows:
• Source Port specifies the device and port to which this treatment (QoS profile) applies.
• Profile is the QoS profile that applies to this port.
• Owner indicates how the rule was generated. If the rule was configured by the Policy Manager, the
owner will be EPICenter.
448 EPICenter Software Installation and User Guide