Extreme Networks EPICenter Software Installation Manual page 506

EPICenter Database Views
Column Name
sysContact
read_write_community
read_only_community
cli_login
cli_password
status
boot_time
hardware_id
reserved
ip_forwarding
current_software
The following columns are Extreme specific:
primary_image
secondary_image
boot_rom
image_after_reboot
board_number
other_numbers
serial_numbers
fan_status_string
selected_configuration
power_status_string
rps_status
voltage
temperature
default_gateway
506
Column
Type Description
string The sysContact of the device.
string The read/write SNMP community string.
string The read-only SNMP community string.
string The CLI/Telnet login name of the device.
string The CLI/Telnet password for the above login.
string The status of the device: "operational", "marginal", or "not responding".
string The boot time of the device in GMT, e.g. "2000-11-13 21:05:28".
string The vendor specific hardware id of the device (not all device have a
hardware id).
string Reserved field, only used by a Cisco device to store Cisco specific
information.
string "true" if the device is a router, "false" otherwise.
string The software version of the device.
string The primary software image version on the device, e.g. "4.1.9 (2)".
string The secondary software image version on the device, e.g. "6.1.5b20".
string The version of the device's boot rom, e.g. "7.2".
string The image to use after a switch reboot: "primary", "secondary", "neither",
or "unknown".
string The hardware board number.
string Other hardware board numbers.
string The serial number of the device.
string The status of all fans on the device, e.g. "fan 1 OK; fan 2 OK; fan 3
OK".
string The currently selected configuration on the device: "primary" or
"secondary".
string The status of the primary power supply of the device: "fan/temperature
alarm", "not present", "OK", "failed", or "unknown".
string The status of the redundant power supply of the device:
"fan/temperature alarm", "not present", "OK", "failed", or "unknown".
string The voltage of the power supplied to the device: "110 AC", "220 AC", "48
DC", or "unknown".
integer The current operating temperature of the device in centigrade, e.g. 48.
string The default gateway of the device, e.g. "10.205.0.1".
EPICenter Software Installation and User Guide