Modifying A Device Group - Extreme Networks EPICenter Software Installation Manual

SNMP V3 Privacy Protocol: Specifies the SNMP V3 privacy protocol. Select either No Privacy or
CBC DES Privacy.
SNMP V3 Privacy Password: If the device is using CBC DES Privacy, enter the privacy password.
SNMP V3 Authentication Protocol: Specifies the SNMP V3 authentication protocol. Select No
Authentication, MD5 Authentication, or SHA Authentication.
SNMP V3 Authentication Password: If the devices is using SNMP V3 Authentication, enter the
authentication password.
6 Click Modify to add the changed information to the EPICenter database.
7 Click Close to cancel the Modify process.
8 Click Reset to reset the values to their defaults.

Modifying a Device Group

Devices are always a member of a device group; devices not explicitly assigned to another device group
are members of the Default device group. This has two effects related to modifying device groups:
• When devices are removed from all other device groups, they are automatically added to the Default
device group.
• Devices cannot be removed from the Default device group using the Remove button in the Modify
dialog. To remove a device from the default device group, you must move it to another device
group.
You can begin the modify function using the Modify button on the toolbar, or by selecting a device
group in the Component Tree, right-clicking to display the pop-up menu, and selecting Modify Device
Group.
To add or remove devices in a device group, do the following:
1 Click the Modify button at the top of the Inventory Manager main page.
Select the appropriate tab to display the Modify Device Group window, as shown in Figure 35.
EPICenter Software Installation and User Guide
Modifying Devices and Device Groups
107