Extreme Networks EPICenter Software Installation Manual page 339

To view, delete, or add protocol filter definitions, do the following:
1 Click Protocol Filters in the VLAN Manager.
The View/Delete page of the Protocol Panel dialog box is displayed, as shown in Figure 170.
Figure 170: Protocol Panel dialog box, View/Delete page
.
This page shows all the protocol filters configured within the EPICenter database. Any filters that are
in use by a VLAN are indicated with an asterisk (*) in the In Use column.
2 To delete a protocol filter, select a filter in the list, and click Delete.
This deletes the protocol filter from all Extreme Networks switches managed by the EPICenter
software, as well as from the EPICenter database.
NOTE
If a filter is in use by a VLAN, you cannot delete it.
3 Click Close to exit the window.
To add a protocol filter, follow these steps:
1 Click the Add tab at the top of the Protocol Panel dialog box to display the Add Protocol page, as
shown in Figure 171.
Figure 171: Protocol Panel dialog box, Add Protocol page
.
EPICenter Software Installation and User Guide
Adding and Deleting Protocol Filters
339