Using The Tools Menu; Mark Links Mode; Adding Links To A Vlan - Extreme Networks EPICenter Software Installation Manual

• To view VLANs configured on a link, select the link. VLAN configuration information for the devices
on both sides of the link is displayed in the Map Element Description panel. (Note that this
information is always displayed for links, even if you do not have the VLAN Display option
selected.)

Using the Tools Menu

Using the tools menu, you can add links to a VLAN, connect edge ports to a VLAN, and view a variety
of information about the devices represented by the nodes on the map. By selecting a function from the
Tools menu, or from the Device pop-up menu, you can invoke displays of information kept by
EPICenter for the selected device.

Mark Links Mode

The Mark Links Mode is a toggle that allows you to click on links to select them. When the toggle is
on, you can select links on different maps. EPICenter remembers all of the links from each map.
Selected links flash on the screen. Mark links mode is required for using the Add Links to VLAN
function.
To set mark links mode, select Mark Links Mode from
the Tools menu, or click the Mark icon on the icon bar
To deselect a link, click on the link.

Adding Links to a VLAN

Use the Add Links to VLAN function to add marked links to a new or existing VLAN.
To add a link to a VLAN, do the following:
• Select Mark Links Mode from the Tools menu.
• Select one or more links to be added to the VLAN.
• Select Add Links to VLAN from the Tools menu.
The Add Links to VLAN Dialog box opens, as shown in Figure 154.
EPICenter Software Installation and User Guide
Using the Tools Menu
315