Extremeware 5.X Features - Extreme Networks EPICenter Software Installation Manual

Ingress port list
Deny, Permit,
Permit-Established actions
Precedence
Rules without precedence
Acl name
Supports QP1-QP8
* See the ExtremeWare Software User Guide for information on how the device treats rules without precedence numbers.
Source Port QoS
Supports QP1-QP8
Supports "blackhole"
VLAN QoS
Supports QP1-QP8
QoS Profile
Min/Max bandwidth
Priority
Min/Max Buffer
Per-port profile

ExtremeWare 5.x Features

EW 5.x Features
IP QoS
Source ip/wildcard
Destination ip/subnet/wildcard
EPICenter Software Installation and User Guide
Partial Can display access-list with ingress port list. Does not
configure any access-list using ingress port list.
Partial "Deny" is displayed as "blackhole" QoS profile.
"Permit-Established" is not supported.
No EPICenter cannot display any rules with precedence number.
Yes* EPICenter cannot set rules with precedence number. All
EPICenter access-list rules appear with a precedence number
of 0. It is up to the device to determine how to deal with
overlaps between the policy rules.
No EPICenter cannot set or display the access-list name. Access
list rules created by EPICenter created appear in the CLI with
names 'mgmt1', 'mgmt2', and so on. When displaying an
access-list in the ACL viewer, the name column is empty.
Yes
Yes
Yes Source port blackhole is implemented as disabling the source
port.
Yes
Yes
Yes
No
No
Supported
in
EPICenter Notes
Yes
Yes
ExtremeWare 5.x Features
529