Findaddr Output - Extreme Networks EPICenter Software Installation Manual

Table 17: FindAddr command options (continued)
Option
Search domain options:
-dg <device group>
-pg <port group>
-dip <IP address>
-port <port>
• You can specify only one EPICenter server (database) in a command. If you want to search devices
from the inventory databases of multiple EPICenter servers, you must use a separate command for
each server.
• You can specify multiple IP and MAC addresses as search items by repeating the
options.
— For MAC addresses, you can specify a wildcard for the last three values in the address (such as
10:11:12:*:*:*).
— Wildcards are not supported for IP addresses. To search for multiple IP addresses, you can use
the
-all
— You can specify both an IP address and a MAC address as search addresses in one command.
• You can specify each search domain option multiple times.
— Wildcards are not supported for device IP addresses. To include multiple devices in the search
domain, you can specify a device group that contains the devices, or specify multiple -dip
options.
— To restrict the search domain to one or more ports on a device, specify the
immediately after the
the server port specification.
— You can specify individual devices, device groups, and port groups in a single command.

FindAddr Output

The output from the FindAddr command is displayed as tab-delimited text, one line per address. Each
line contains the following information:
• Both the MAC address and the corresponding IP address.
• The switch and port to which the address is connected.
• The user (name) currently logged in at that address, if applicable.
The output also tells you the total number of addresses found, and lists any switches in the search
domain that were unreachable.
EPICenter Software Installation and User Guide
Value
Defines the search domain to include the
specified device group.
Defines the search domain to include the
specified port group.
Defines the search domain to include the
device specified by the IP address.
Defines the search domain to include one or more ports on the
device specified by the -dip option. Multiple ports can be specified
separated by commas. Slot and port are specified as slot:port. For
example, 1:2,2:3
Important: If used, this option must immediately follow the -dip
option to which it applies.
option, or include multiple
option. If you place it anywhere else in the command, it will be taken as
-dip
options.
-ip
The FindAddr Utility
Default
At least one of None
-dip, -dg, or -pg
must be provided.
These options
may be repeated
and combined.
All ports
on the
device
or
-ip -mac
option
-port
483