Using the Inventory Manager
NOTE
Make sure the device passwords are correct for the selected devices. If you are adding multiple
devices in one operation, make sure the passwords you specify are correct for each device. A
device cannot be added if the password is not correct.
Figure 25: Setting default device options for discovered devices
13 Click the SNMP tab to configure SNMP settings (see Figure 26).
Figure 26: Setting SNMP default device options for discovered devices
14 Click OK to proceed with the Add process.
A message window (shown in Figure 27) appears to show you the progress of the Add command.
98
EPICenter Software Installation and User Guide