Extreme Networks EPICenter Software Installation Manual page 161

Overview of the Configuration Manager
To view the Upgrade display for a selected device group or device:
• Right-click on the device group or device, then select Upgrade from the pop-up menu that appears
or click Upgrade from the Tool Bar.
This opens the Download Image window. Select the appropriate tab to display the Device window or
the Device Slot window.
See "Upgrading Software Images" on page 170 for details on using this feature.
Devices
This menu contains the following device-related submenus: Alarms, Browse, EView, Statistics, Sync,
Telnet, and VLANs.
NOTE
The Sync submenu is disabled if the device is offline.
Alarms
The Alarms function runs the EPICenter Alarm System and displays the Alarm Browser function to
show the alarms for the selected device.
To view the Alarms display for a selected device:
• Right-click on the device, then select Alarms from the pop-up menu that appears
This starts the Alarm System applet in a new window. The Alarm System displays the Alarm Log
Browser and displays the alarms for the selected device.
See Chapter 5 for details on using this feature.
Browse
The Browse function runs the ExtremeWare Vista switch management interface for the selected device.
To run ExtremeWare Vista for a selected device:
• Right-click on the device, then select Browse from the pop-up menu that appears
This starts the ExtremeWare Vista login page in a new web browser window.
Refer to the ExtremeWare Software User Guide for details on using ExtremeWare Vista.
EView
The EView function runs the EPICenter ExtremeView applet and displays the device front-panel image
and device information for the selected device.
To view the EView for a selected device:
• Right-click on the device, then select EView from the pop-up menu that appears
EPICenter Software Installation and User Guide 161