Upgrading From Epicenter Or Ridgeline Service Advisor To Ridgeline - Extreme Networks Ridgeline Installation Manual

Chapter 4: Upgrading the Ridgeline Software
4 Restart the Ridgeline server and the database engine, if applicable. See
or Solaris" on page 24
Ensure that you clear your browser cache before reconnecting to the Ridgeline server.
Upgrading from EPICenter or Ridgeline Service
Advisor to Ridgeline
To upgrade the EPICenter or Ridgeline Service Advisor software to the Ridgeline software do the
following:
1 If you are installing from CD, you will find three installation executables, one for each platform
(Windows, Linux, and Solaris). If you downloaded from the web site, only the executable for your
platform will be included.
2 Start the installation wizard as follows:
For Windows, run
Ridgeline_3-0_win32.exe
version of the operating system.
For Linux:
a If you downloaded the installation from the web site, change the permissions on the Linux bin
file as follows:
chmod 755 Ridgeline_3-0_linux32.bin
or
chmod 755 Ridgeline_3-0_linux64.bin
(Skip this if you are installing from the CD).
b Run the executable
on your version of the operating system.
For Solaris:
a If you downloaded the installation from the web site, change the permissions on the Solaris bin
file:
chmod 755 Ridgeline_3-0_solarisSPARC.bin
(Skip this if you are installing from the CD).
b Run the executable
InstallShield will extract the Ridgeline Installation Wizard. This may take a few minutes.
46
for instructions.
Ridgeline_3-0_linux32.bin
Ridgeline_3-0_solarisSPARC.bin
"Starting the Server on Linux
or
Ridgeline_3-0_win64.exe
or
Ridgeline_3-0_linux64.bin
Ridgeline Installation and Upgrade Guide
, depending on your
, depending