Viewing Device Status Information - Extreme Networks EPICenter Software Installation Manual

Using ExtremeView
Figure 104: The ExtremeView applet, main page
Use the tabs in the Component status/detail panel as follows:
• Status displays status information for the devices known to EPICenter. You can view summary
status for the devices within a device group. You can view status and configuration information for
individual devices, slots, and ports through a front panel view accompanied by a table of
configuration and status information. Select a device subnode under a Device Group name node to
view configuration information for the device.
• Configuration displays configuration information for Extreme Networks switches based on the
configuration categories in ExtremeWare Vista. You can view summary configuration information for
all devices in a device group known to EPICenter, as well as detailed configuration information for
individual Extreme Networks switches, organized by ExtremeWare Vista configuration categories.
Individual third-party devices cannot be accessed through this feature.
• Statistics displays monitoring results for Extreme Networks switches, also based on ExtremeWare
Vista statistics monitoring categories. You can view summary statistics that include active and
inactive port counters for all Extreme Networks devices—in a specific device group—known to
EPICenter, or statistics for individual Extreme Networks switches. Individual third-party devices
cannot be accessed through this feature.

Viewing Device Status Information

Select the Status tab in the ExtremeView applet to display the Status window. The Status window
displays a summary of all of the device groups known to EPICenter, as shown in Figure 105.
244 EPICenter Software Installation and User Guide