The Setup Screens; System Configuration Menu - Emerson E2 Installation And Operation Manual

10.7.4 The Setup Screens

Figure 10-11
- Typical Setup Screen
Setup screens are the interface used to change settings
and setpoints, and define inputs and outputs in the E2.
Figure 10-11 shows a typical Setup screen and its primary
elements. For more details on Setup screens, see Section
10.18.2.3, Navigating the Setup Screen.

10.7.5 System Configuration Menu

Figure 10-12
- System Configuration Menu
The System Configuration Menu is one of the menus
used to set up the E2. Included options are Input/Output
Definitions, internal system information, remote commu-
nications, global data, alarm, logging, and network setup
information.
To open the System Configuration menu:

1. Press

2. Press (System Configuration)
Screen Types
The System Configuration menu contains nine menu
items:
Menu Option
1 - Input Definitions
2 - Output Definitions
3 - System Information
4 - Remote Communica-
tions
5 - Alarm Setup
6 - Logging Setup
7 - Network Setup
8 - Global Data
9 - Licensing
Table 10-4
- System Configuration Menu Options
Description
View the status of all input
boards, as well as set up individ-
ual points on the I/O boards.
View the status of all output
boards, as well as set up individ-
ual points on the I/O boards.
Menu that gives access to more
E2 setup options and informa-
tion.
Gives access to modem informa-
tion, dial-out setup, and TCP/IP.
Set up dial-outs and alarm
reporting for the current E2.
Enter information about Logging
Group applications such as the
sampling frequency and total
number of samples.
Opens the Network Setup menu,
where options to view network
status, add or delete boards and
controllers, commission devices,
set up a router, and make board
associations are available.
Configure one or more analog or
digital sensors to be used as
"global" values by all E2s.
Opens the Licensing Report
page with a list of all licensed
features on the current E2, and
allows additional features, after a
password key has been entered
by the user, to be enabled.
•
Quick Start
-
10 7