Table of Contents
Advertisement
2.3.5
System Configuration Menu
Figure 2-9
- System Configuration Menu
The System Configuration Menu is one of the menus
used to set up the E2. Included options are Input/Output
Definitions, internal system information, remote commu-
nications, global data, alarm, logging, and network setup
information.
To open the System Configuration menu:
1.
Press
.
2.
Press
(System Configuration).
The System Configuration menu contains nine menu
items:
Menu Option
1 - Input Definitions
View the status of all input
boards, as well as set up individ-
ual points on the I/O boards.
2 - Output Definitions
View the status of all output
boards, as well as set up individ-
ual points on the I/O boards.
3 - System Information Menu that gives access to more
E2 setup options and informa-
tion.
4 - Remote
Gives access to modem infor-
Communications
mation, dial-out setup, and
TCP/IP.
5 - Alarm Setup
Set up dial-outs and alarm
reporting for the current E2.
6 - Logging Setup
Enter information about Log-
ging Group applications such as
the sampling frequency and
total number of samples.
Table 2-4
- System Configuration Menu Options
Screen Types
Description
Menu Option
7 - Network Setup
Opens the Network Setup menu,
where options to view network
status, add or delete boards and
controllers, commission
devices, set up a router, and
make board associations are
available.
8 - Global Data
Configure one or more analog
or digital sensors to be used as
"global" values by all E2s.
9 - Licensing
Opens the Licensing Report
page with a list of all licensed
features on the current E2, and
allows additional features, after
a password key has been
entered by the user, to be
enabled.
Table 2-4
- System Configuration Menu Options
2.3.6
The System Information
Menu
Figure 2-10
- System Information Menu
The System Information Menu is another menu used to
set up the E2. The options in this menu allow setting up
time and date, passwords, toggle full options, general
information about the controller, and system administrator
functions.
To open the System Information Menu:
1.
Press
.
2.
Press
(System Configuration).
3.
Press
(System Information).
Description
•
Screens and Menus
7
Advertisement
Table of Contents
