Selecting The Card Hopper (Hdp600 And Hdp600-Lc Only) - FARGO electronics HDP600 User Manual

RESTRICTED USE ONLY

Selecting the Card Hopper (HDP600 and HDP600-LC only)

Selects the appropriate Card Hopper
Step Procedure
1 a. Select First Available to print from the hopper currently selected as
indicated on the Printer's LCD. Also select this option if you would like the
Printer to automatically switch to the other hopper once the current
hopper runs out of cards.
b. Select Hopper 1 to print only from Hopper 1. When this option is
selected, the hopper will not automatically switch to the other hopper if
you run out of cards in Hopper 1. Select Hopper 2 to print only from
Hopper 2 in this same fashion
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Fargo Electronics, Inc.
7-19