FARGO electronics HDP600 User Manual page 322

RESTRICTED USE ONLY
Changing the Encoder Settings
Make this selection to modify the Encoder settings. These settings would need to be
changed (a) if the Print Board is replaced or (b) if the Printer is upgraded to include an
Encoder.

Mag: YES or NO.

Contact: YES or NO.

Contactless: Mifare, iClass or NO.

HID Prox: YES or NO.
Step Procedure
1 Select MENU, Setup Printer and Encoder Settings.
2 Change the desired option as needed.
Example: Adding a Mag Encoder change MAG from No to Yes.
3 Press SELECT to change the value.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Fargo Electronics, Inc.
11-20