FARGO electronics HDP600 User Manual page 359

RESTRICTED USE ONLY
Glossary of Terms (continued)
Term
Saturation
Self-test
Sensor
Serial
communications
Serial interface
SIMM (Single In-Line
Memory Module)
Simplex
SmartGuard
SmartGuard™
SmartShield™
Smart Card
Software
Spooler
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Definition
A measure of the degree of color, from gray, with the same
brightness.
A pre-determined print file used to confirm Printer operation
typically sent from the driver or stored in the Printer's memory.
An electro-mechanical/electro-optical device used to indicate a
change in state in the Printer such as when a card reaches a
certain location.
The transfer of data, one bit at a time and in sequential order,
using a single wire.
A sub D 9 pin input/output port on the Printer, used for serial
communication with the PC for AS400 operating systems or for e
card encoding.
An array of memory chips, attached to a printed circuit Board that
installs in a slot on the main Board.
Single-sided printing.
An application from FARGO Electronics that allows users to
prevent access to the Printer through the use of a personally
encoded Smart Card.
SmartGuard is a Printer security option that uses a custom access
card and a built-in reader to restrict Printer access. Only a valid
access card can enable the Printer to print cards.
This option allows the Printer to print custom, security images on
the card that reflect under a black or UV light source.
Smart cards have an embedded computer circuit that contains
either a memory chip or a microprocessor chip. There are several
types of Smart Cards: Memory, Contact, Contactless, Hybrid
(Twin), Combi (Dual Interface), Proximity and Vicinity.
Instructions saved in computer memory that directs the computer
to perform certain tasks and functions.
A computer application that allows the spooling of print jobs.
Fargo Electronics, Inc.
Continued on the next page
15-17