FARGO electronics HDP600 User Manual page 255

RESTRICTED USE ONLY
The display (below) represents how the printed image will move in relation to the fixed card
position as positive and negative image placement values are entered.
Step Procedure
2 Use the Vertical adjustment to move the image toward the rear of the Printer
if a positive number is entered and toward the front of the Printer if a negative
number is entered.
OR
Use the Horizontal adjustment to move the image toward the card output
side of the Printer if a positive number is entered and toward the card input
side of the Printer if a negative number is entered.
(Note: The maximum value for the Vertical and Horizontal adjustments is
±100 Pixels (10 Pixels = 0.03 (.8mm).)
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Fargo Electronics, Inc.
7-44