FARGO electronics HDP600 User Manual page 109

RESTRICTED USE ONLY
Installing the HDP600 Series Card Lamination Module (continued)
Step Description
8 Insert the Driver disk into the CD drive of your PC. (Note: Refer to the
HDP600 High Definition Card Printer/Encoder User Guide for details on
installing the Printer Driver.)
9 Follow the Windows Installation Wizard instructions to install the Driver.
10 When prompted by the Driver, connect the Printer, the Lamination power
supplies and the USP cable.
11 Continue with the Driver installation until prompted to exit by the Driver. (Note:
The Printer will automatically update the Firmware to include the Laminator.)
12 You have completed this procedure.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Fargo Electronics, Inc.
3-62