FARGO electronics HDP600 User Manual page 70

RESTRICTED USE ONLY Fargo Electronics, Inc.
Connecting power to the HDP600 Printer (cont.)
Display C - Connecting the other end of the AC power cable to a Surge Protector. See both
notes below.
Note No. 1: Instead of connecting the AC power cable directly into an AC outlet, it is
recommended that a Surge Protector be used to protect against power surges.
Note No. 2: Some buildings have surge protection built into the electrical outlets. Please
consult your building supervisor regarding this material.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3) 3-23