Reviewing The Rejection Card Hopper And Card Output Hopper - FARGO electronics HDP820 Service Manual

RESTRICTED USE ONLY

Reviewing the Rejection Card Hopper and Card Output Hopper

Component Description
Rejection The Rejection Card Hopper helps to
Card Hopper separate potentially bad cards from a stack
of good cards, which eject into the Card
Output Hopper.
The Printer will automatically eject cards
into this hopper to indicate:
•
•
Card Output Stores up to 100 printed cards (30 mil
Hopper cards).
a. When the hopper has reached its
b. Remove the stack of cards from the
c. Press the Lamination Module's Resume
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
There is a printing error, laminating
error or encoding error.
There is a card is left in the Printer after
a print job is canceled or the Printer
restarted.
maximum capacity of cards, note that
the operation pauses and an Output
Hopper Full message appears on the
Printer's LCD Display.
hopper.
button to continue. (Note: If printing
onto oversized cards, the Card Output
Hopper Door should be placed in the
open position in order for these larger
cards to eject properly.)
Fargo Electronics, Inc.
Reference
See the Using the
Lamination tab (only with
the Card Lamination
Module) in Section 5, page
238.
See the Using the
Lamination tab (only with
the Card Lamination
Module) in Section 5, page
238.
43