FARGO electronics HDP600 User Manual page 251

RESTRICTED USE ONLY
Using the Image Color tab (continued)
Step Procedure
4 Control the amount of heat the Printer uses when printing with the resin black
Panel by adjusting the Resin Heat slide.

Move the slide to the left to cause less heat to be used in the printing
process, causing resin images to be lighter or less saturated.
OR

Move the slide to the right to cause more heat to be used, causing resin
images to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the sharpness of resin text
and bar codes.)
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Fargo Electronics, Inc.
7-40