FARGO electronics HDP600 User Manual page 39

RESTRICTED USE ONLY
Printer Components: LCD and Softkey Control Pad (continued)
Component Description
Error/Attention The Printer is capable of communicating two similar yet different types
Screens of message or prompt screens:
The first is called an ATTENTION screen. (Note: This screen appears
if an error occurs and will completely stop Printer operation. In this
case, the LCD will display ATTENTION on the first line and a brief
description of the error on the following lines.)


The second type of prompt is called a MESSAGE screen. (Note: This
screen will not stop Printer operation and serves to communicate
helpful reminders, such as if you are running low on print supplies and
also communicates any other Printer conditions of which you should be
aware. In this case, the LCD will display Message on the first line and a
brief description of the condition on the following lines.)

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Press the Help button if you would like a more detailed explanation
of the error message. This will bring up the help screen explaining
the nature of the error and how to correct it. If necessary, use the
scroll buttons to scroll down the paragraph of help text.
Press Quit when you are done reading. Once the error is corrected,
resume operation or reset the Printer according to how you were
instructed in the help screen.
Like error messages, help text explaining the particular condition
can also be accessed by pressing the Help button.
Fargo Electronics, Inc.
2-21