FARGO electronics HDP600 User Manual page 330

RESTRICTED USE ONLY
Using the Show Card Count option
Step Procedure
1 Use this option to view the total Card Count (CC), Pass Count (PC), Transfer
Count (TC).

The Card Count is the total number of cards the Printer has produced.

The Pass Count is the total number of print passes made by the Printhead.
(Note: A pass is measured each time a single Ribbon Panel is printed upon
beneath the Printhead.)

The Transfer Count is the total number of times the Printer transfers an
image to a card. In most cases, this information is only necessary for certain
warranty requirements, however, it can also be a helpful way to measure a
Printer's overall work cycle.)
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
Fargo Electronics, Inc.
11-28