FARGO electronics HDP600 User Manual page 37

High definition card printer/encoder
Table of Contents

Advertisement

RESTRICTED USE ONLY
Printer Components: LCD and Softkey Control Pad (continued)
Component
Description
Print Status
During operation, the LCD will indicate the current Print Status by
Screen
showing you the area of the Printer that is active. It does this by
displaying the following icons on the second line:
Since the Printer is capable of performing several of these functions
simultaneously, one or all of these icons may appear at once,
depending on if you are printing just one card or a batch of cards.
The Print Status screen always displays Cancel in the lower left and
Pause in the lower right.
The Cancel
Use this button to cancel print jobs and reset the Printer for the next
print job. Cancel now has two options:
button
This Cancel All function will cancel all print jobs in the Printer and will
completely reset the Printer. In this case, be sure to cancel the print
jobs from the PC before pressing YES.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
FEEDING: Indicates that cards are being fed into the Printer.
FLIPPING: Indicates that the card is being transported to the
Flipper station.
ENCODING: Indicates the encode station is encoding a card
(appears only if you are using a Printer with an optional built-in
Encoding Module).
PRINTING: Indicates the Printer is printing onto the HDP film.
RECIEVING DATA: Indicates that the Printer is receiving data from
the PC.
TRANSFERRING: Indicates the Printer is transferring an image to
a blank card.
LAM: Indicates the Lamination Station is applying an overlaminate
to a card (appears only if using a Printer equipped with the optional
Card Lamination Module.
Cancel single job in memory.
Cancel all jobs in memory.
Fargo Electronics, Inc.
2-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdp600 cr100Hdp600-lcHdp600-lc cr100

Table of Contents

Save Article as PDF