(3) Screen Setting
For setting commands in disk array, an interactive menu input method is employed. Each command executes its
function for a single disk array. In order to control plural disk arrays simultaneously, the command should be
executed respectively for the individual disk arrays. An example is shown below.
To start setting commands by opening plural windows, select disk arrays that are not selected by other windows.
As shown in the figure below, the command can be executed simultaneously for iS2000_1 in window 1 and
iS2000_2 in window 3.
As shown in the figure below, once iS2000_1 is selected in window 1 to execute the setting command, the setting
command is refused in window 2 to execute for iS2000_1.
#iSMconf
:
+++ Disk Array Subsystem Selection +++
Disk Array Name
1. iS2000_1
2. iS2000_2
Q. Quit Program
conf:selection> Select Disk Array Subsystem (1 - 2 | Q) = 1
#iSMconf
conf:selection> Select Disk Array Subsystem (1 - 2 | Q) = 1
iS2000_1
Serial Number
0000000100000010
100000013
:
+++ Disk Array Subsystem Selection +++
Disk Array Name
1. iS2000_1
2. iS2000_2
Q. Quit Program
iSM11105:Specified Disk Array Subsystem is being set by another maintenance tool.
#iSMconf
Window2
Window3
conf:selection> Select Disk Array Subsystem (1 - 2 | Q) = 2
Figure 1-1 Starting of Plural Windows
II-35
Chapter 4 Setting Commands
Window1
Serial Number
0000000100000010
100000013
:
+++ Disk Array Subsystem Selection +++
Disk Array Name
1. iS2000_1
2. iS2000_2
Q. Quit Program
SCSI
iS2000_2
Serial Number
0000000100000010
100000013
Console
Need help?
Do you have a question about the Storage Manager Configuration Setting and is the answer not in the manual?