NEC Storage Manager Configuration Setting Tool User's Manual page 55

Each item is described below.
RANK: RANK number
Capacity: RANK capacity
RaidType: RAID type of RANK
RebuildTime: RANK Rebuilding Time
State: RANK Operating status is displayed as one of the followings.
ready:
attn.(reduce):
attn.(rebuilding):
attn.(copy back):
attn.(preventive copy):
attn.(expanding):
attn.(expand-fail):
fault:
fault(media error):
LD: LD Set up in the RANK is displayed in list.
* When RANK specified by "Select RANK Information" does not exist, or when "All RANK Information" is
selected with no RANK bound in disk array, the following error message is displayed.
iSM11172:RANK doesn't exist.
(iv) RANK Map Information Display
The setup condition of LDs in a specified RANK is displayed in map.
--- RANK MAP Information ---
Start Address(h) End Address(h)
00000000 00ffffff
00100000 0010ffff
00110000 00ffffbf
Each item is described below.
Start Address: The start address of LD capacity or free space
End Address: The end address of LD capacity or free space
Capacity: LD capacity, displayed by MB unit
LDN: LD number
* When the specified RANK does not exist, the following error message will be displayed.
iSM11172:RANK doesn't exist.
All RANKs configuring the PDs are in normal status.
Displayed when fault PD has become separated (reduced).
The progress ratio of data rebuilding is displayed.
The progress ratio of spare-copying in redundant status is displayed.
The progress ratio of Preventive Exchange Assignment is displayed.
The progress ratio of logic expansion is displayed.
Error in logic expansion
Function failure occurs.
Function failure occurs in plural PDs.
Capacity LDN(h)
8192MB 0000
32MB 0001
7648MB
II-31
Chapter 4 Setting Commands