Table of Contents
Advertisement
Chapter 4 Setting Commands
(10) Save the Error Contents
When errors are ignored to execute commands, the number of errors is displayed after all commands are executed.
In this case, confirm whether the error contents are to be stored.
Total Status
iSM11330: Failed to get Disk Array Subsystem information.
Error Count
autobind> Save Error Log List? (y | n) = y
autobind:savelog> File Name = logerror.log
'logerror.log' file save completed!!
When storing error contents in a file, type "y"; otherwise, type "n".
- "LD:1/2" has the following meaning.
LD:
Numerator:
Denominator: Indicates the number of executed commands.
(11) Check the Continuation
In this step, confirm whether the batch setup command is to be continued.
autobind> "Auto Bind" Continue? (y | n) = n
When continuing the command, select "y"; otherwise, select "n".
When "y" is selected, the screen returns to Section 4.1.1 (2) "Select disk array and PDG".
When "n" is selected, the program quits.
LD
:
1/
2
Indicates an item in which an error occurs. Of Hot Spare, RANK, and LD, only the items in
which an error occurs are displayed.
Indicates the number of errors.
II-10
Advertisement
Table of Contents
