Table of Contents
Advertisement
* When the PD specified by "Select PD Information" does not exist, or when there is no PD in disk array, the
following error message is displayed.
iSM11174:PD doesn't exist.
(2) Disk array Information Display
When "20. View Current Settings" is selected from the menu, the information and the settings of functions of disk
array are displayed as follows.
--- Disk Array Subsystem Information ---
Disk Array Name
Vendor ID
Product ID
Product Revision
Serial Number
--- Cross Call Mode ---
Cross Call Mode
Auto Assignment Mode
--- Expand LUN ---
Port No.(h) Exist Expand LUN
00-00
yes
00-01
no
01-00
yes
01-01
no
--- Auto Repair Mode ---
Auto Repair Mode
--- Disk Array Clock ---
2000/06/17 08:30:00 (Sat)
Each item is described below.
(i)
Disk Array Subsystem Information
The detailed information on a specified disk array is displayed.
Disk Array Name:
Vendor ID:
Product ID:
Product Revision:
Serial Number:
(ii)
Cross Call Mode
The setting value of Cross Call is displayed.
Cross Call Mode:
Auto Assignment Mode:
= iS2000
= NEC
= S2100 Disk Array
= W249
= 00001234
= on
= off
on
on
on
on
= on
Individual name of disk array
ID information on disk array provider
model name of disk array
version information on disk array
product number of disk array
ON/OFF of Cross Call mode is displayed.
ON/OFF of Auto Assignment Mode is displayed.
II-33
Chapter 4 Setting Commands
Advertisement
Table of Contents
