NEC Storage Manager Configuration Setting Tool User's Manual page 50

Chapter 4 Setting Commands
(6) Disk array Time Setting
Select "26. Subsystem Time" from the menu and input parameters as follows to set the time in disk array.
However, setting is not allowed under an automatic setting system.
Refer to the "NEC Storage Manager User's Manual" on OS concerned for setting change between automatic and
manual.
Subsystem Time
1. Set Clock by OS Time
2. Set Clock by Your Input Time
R. Return To Main Menu
conf:clock> Command Number (1 - 2 | R) = 2
conf:clock> Year (2000 - 2099) =
conf:clock> Month (1 - 12) =
conf:clock> Day (1 - 31) =
conf:clock> Hour (0 - 23) =
conf:clock> Minute (0 - 59) =
conf:clock> Second (0 - 59) =
Each parameter is described below.
- Command Number
1. Set Clock by OS Time:
2. Set Clock by Your Input Time:
* Only when 2 is selected, input parameter as follows.
- Year
Input Year.
- Month
Input Month.
- Day
Input Day.
- Hour
Input Hour.
- Minute
Input Minute.
- Second
Input Second.
(7) Acquisition of disk array Internal Log
Select "27. Error Log Dump" from the menu and input parameters as follows to collect and save into a file disk
array internal logs.
Error Log Dump
conf:log_dump> Save Log File Name =
Adjust clock to OS time.
Adjust clock to arbitrary time.
II-26