Table of Contents
Advertisement
Chapter 4 Setting Commands
(ii)
LD Number and Volume Name Display
Correspondence of LD number and volume name is displayed.
--- LD No./Name Information ---
LDN(h) OS Type
0000
0001
0002
Each item is described below.
LDN:
OS Type:
LD Name:
* When LD is not specified in "Select LD No./Name Information", or when "All LD No./Name Information" is
selected but no LD is bound in the disk array, the following error message is displayed.
iSM11173:LD doesn't exist.
* For details on how to OS Type and LD Name setting, refer to the description part of setting function in the
"NEC Storage Manager User's Manual" in accordance with your OS.
(iii) RANK Information Display
Information on RANK bound in specified disk array is displayed below.
--- RANK Information ---
RANK(h) Capacity RaidType RebuildTime State
00-00
LD(h) = 0000,0001
00-01
LD(h) = 0000,0001
00-02
LD Name
NX
nxsvr/c10t0d0
NX
nxsvr/c10t0d1
NX
nxsvr/c10t0d2
LD number
OS Type of each LD acquired from disk array is displayed as follows.
A4:
logical disk operated by ACOS-4 system
A2:
logical disk operated by ACOS-2 system
NX:
logical disk operated by HP-UX system
WN:
logical disk operated by Windows system
CX:
logical disk operated by Solaris system
LX:
logical disk operated by Linux system
AX:
logical disk operated by AIX system
Arbitrary identification information (volume name) of each LD acquired from disk array
20.0GB RAID1
10
20.0GB RAID5
24
20.0GB RAID5
10
ready
ready
attn(rebuilding)
II-30
29%
Advertisement
Table of Contents
