NEC Storage Manager Configuration Setting Tool User's Manual page 31

(7) Check the LD Bind
The number of LD, RAID Type, LD capacity, the number of unused RANK, and unused capacity to be created by
the binding are displayed. When binding LDs for unused capacity, execute iSMconf.
RAID Type is the same as the RANK format specified by (4) "RANK Bind".
Number of LD
RAID Type
LD Capacity
Unused RANK
Unused Capacity
autobind> Is this OK? (y | n) =
If there is no change on this setting, select "y". When changing set values, type "n"; the screen returns to step
(6) "LD Bind".
* When there are multiple RANKs, Unused Capacity is displayed for the RANK that has the largest capacity of
RANKs binding LDs.
When the number of created LDs is specified with 0, the message below is displayed, and the screen returns to
step (6) "LD Bind".
iSM11255:Cannot bind LD by specified parameter.
(8) Save the Setting File
In this step, store the contents defined above in a file. A PDG having the same configuration can be created
easily by using the stored file in step (2) "Read the Setting File".
SAVE Parameter
Spare Count
RAID Type
Number of PD
LD Count
LD Capacity
autobind> Save config file? (y | n) = y
autobind> File Name = setting.conf
When storing the setting file, select "y" and type a file name.
When not storing the setting file, select "n".
: 1
: High Reliability:RAID1(1+1)
: 17024MB
: 1
: 0MB
: 0
: High Reliability:RAID1(1+1)
: 2
: 1
: 17024MB
II-7
Chapter 4 Setting Commands