Test/Restore Integrity Of Data On Internal Hard Disk (Scandisk); Rewriting System File Data (Factory Initialize); Formatting The Hard Disk (All Initialize) - Zoom MRS-802 Operation Manual

Reference [Other Functions]
5.
When the command has been executed, turn the
unit off and then turn it on again.
The MRS-802 will operate in normal mode.
Test/restore integrity of data on
internal hard disk (ScanDisk)
This action serves to test the disk and perform restorative
action if necessary. Try using this function when operation
of the MRS-802 has become unstable.
N
OTE
ScanDisk may not be able in all cases to restore damaged
files. To guard against data loss, it is recommended to
regularly back up data from the hard disk onto CD-R/RW
discs.
1.
Refer to steps 1 - 3 of "Basic maintenance
procedure" to bring up the indication "ScanDisk"
on the display. Then press the [ENTER] key.
The ScanDisk menu for selecting the test function appears.
AutoRepr AutoRepr
<-ENT-> <-ENT->
2.
Use the cursor left/right keys to select the
ScanDisk function.
• AutoRepr (Auto Repair)
This function tests all files on the hard disk and
automatically repairs damaged files.
• ChekFile (Check File)
This function only tests all files, but does not automatically
repair them. If a problem is found, a message is displayed on
the screen.
3.
To execute the selected function, press the
[ENTER] key.
The ScanDisk operation starts.
Once ScanDisk has started, it cannot be interrupted by the
user. Never turn power to the unit off while ScanDisk is
running. Otherwise the hard disk may be destroyed.
138
4.
When ScanDisk is completed, press the [EXIT] key.
The unit returns to the condition of step 1.
Rewriting system file data (Factory
Initialize)
This action restores only the system files and other data
necessary for operation of the MRS-802. Audio data created
by the user are not affected by this operation. Try using this
function if operation of the MRS-802 is still unstable even
after using the ScanDisk function.
1.
Refer to steps 1 - 3 of "Basic maintenance
procedure" to bring up the indication "Init Fac" on
the display. Then press the [ENTER] key.
The indication "Init Fac SURE?" appears on the display to
confirm the operation.
Init Fac Init Fac
Sure? Sure?
2.
To carry out the initialization process, press the
[ENTER] key once more.
The factory initialize process starts. When it is complete, the
unit returns to the condition of step 1.
Formatting the hard disk (All
Initialize)
This action formats the hard disk of the MRS-802 and then
restores the system files and other data necessary for
operation of the MRS-802. All existing projects on the hard
disk including the demo songs will be erased.
N
OTE
Once erased, projects cannot be restored. Use this function
with extreme care. If you want to preserve projects, back
them up to CD-R/RW disc first (
1.
Refer to steps 1 - 3 of "Basic maintenance
procedure" to bring up the indication "Init ALL" on
the display. Then press the [ENTER] key.
The indication "Init ALL SURE?" appears on the display to
confirm the operation.
→
p. 119).
ZOOM MRS-802