Transparency Separators - Xerox CopyCentre C123 Quick Reference Manual

3 Copy
Paper Tray Settings
Displays the [Covers - Paper Tray Settings] Screen. Select one of the presets to specify
the [Covers Tray] and the [Body Pages Tray]. The paper loaded in the trays selected
for [Covers Tray] and [Body Pages Tray] should be the same size and orientation. Five
presets including [Bypass Tray] are available for each. For more information on the
bypass tray, refer to [Tray 5 (Bypass)] Screen on page 46.

Transparency Separators

This feature allows you to copy onto transparency stock, to place dividers between the
pages, and to make hard copy sets for handouts.
1.
Select [Transparency
Separators] on the [Output
Format] screen.
2.
Select the required option.
3.
Select [Save].
Off
Disables the feature.
Blank Separators
Places a blank sheet of paper between each transparency sheet.
Blank Separators + N Sets
Copies one set of transparencies with blank dividers, along with sets of paper copies
for handouts.
No Separators + N Sets
Copies one set of transparencies with no dividers, along with sets of paper copies for
handouts.
Paper Tray Settings
Displays the [Transparency Separators - Paper Tray Settings] Screen. Select one of
the presets to specify the [Transparency Tray] and the [Separators/N Sets Tray]. Five
presets including [Bypass Tray] are available for each. For more information on the
bypass tray, refer to [Tray 5 (Bypass)] Screen on page 46.
64 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide